Saturday, July 9, 2011

In the home stretch

We made a lot of mileage today and stayed at the Stingaree Marina in Crystal Beach TX.  We were able to slide in at low tide skimming the bottom to get into the slip.  We got electricity and filled up all water tanks which was nice.  Best of all was a restaurant and bar right on property. 
We had a nice dinner and went to sleep at a decent hour.  I feel asleep before Deb and she was dozing when she heard voices.  When she peeked out, there were a few people standing next to the boat on the finger peer checking it out after the bar closed.


We realized we didn't have a long trip the next day so we slept late (7am) and were out by 7:30am.  We passed one of the coolest Tugs we had seen on the whole trip.
OLD GLORY - Liked the logos and name of this one

We were in Galveston in just a few hours and then up the very busy Houston Ship Channel.  We encountered the largest ships we had on the whole trip here where the ships come out of Houston and down the Houston Ship Channel out to the Gulf of Mexico.  One cool thing is that the dolphins love to jump in the bow wake as they push all this water along.
Dolphin in Bow wake of a ship

Dolphin in Bow wake of a ship

We tried to stay just to the outside of the ship channel and decided to take a pit stop at RedFish island to check it out.  This will be one of our more common anchor out locations for a nice overnight or 3 day stay.  It is only a few hours away from our home port.
A couple of boats anchored at Red Fish island which has been rebuilt after being blown away in a hurricane


We sailed a bit, but there was very little wind to do so.  We always see the "BoardWalk Beast" which is a custom built speed boat that seats about 50 people.  It hauls but around the bay and gets everyone soaking wet.  It is always a bit of a cool site when she is pounding into the waves and those teeth are painted on the hull to look like a "bone in her teeth".
Bone in her Teeth - Boardwalk Beast


We motored past Kemah Boardwalk and into Clear Lake.  We skimmed along Watergate Marina realizing that it was recently dredged and pulled into our isle at Legend Point Marina.  We decided to back in to the slip and while we didn't do it quickly, we again made it look like we knew what we were doing with our new vessel (always a good feeling at the helm when people come up to the edge of the dock to help but then realize there is not much that they need to do).

We tied up and then enjoyed a long, long, long shower at home.

The trip is over, it was quite a bit of fun, and filled with adventure.  We really enjoyed it and are also glad it is over.  In retrospect we tried to compare this to our dream of cruising, and the one thing that was not like what we expect crusing to be is that we would get to enjoy a spot for some time.  We spent some time in some really cool anchorages and locations, and I would have really liked to stay in them for a few days or a week or so.  But that was not our goal on this trip, it was all about ensuring 50 miles per day to get home on time.

Our boat did well, in the end, we had an electrical issue and have some sail repairs to make, but I have been pretty impressed with our 35 year old engine that ran 12-14 hours per day for 13 days straight.  I was afraid to say that at any point during the trip but with the boat safely tied in the slip, I will verbalize how thrilled I am at that fact.
I also have a slight diesel leak to repair, and I think it is coming from the secondary 2 micron fuel filter but just didn't want to dig into that project yet.

Since returning, I have cleaned the bilge and I must say it was a disgusting brew down there.  I found 4 screwdrivers, 2 metal scrapers, an old bronze thru-hull fitting, a bunch of electrical tape and about 20 cut tie wraps.  It is cleaner, but not clean yet.  As soon as I can dig out all that old sludge crap, I will be painting the bilge with a new coat of white paint, but I figure I won't waste the time doing that until the bilge and engine is cleaned.  Sadly, this ole' Perkins leaks oil so I have to get a bit more creative than just a bilge sock down there, so I may make a removable tray that fits under the engine with wire wrapped oil absorbant pad, so the water in the bottom of the bilge is just water.

1 comment:

  1. We need to get a picture of her in her home slip and post that one now too.

    ReplyDelete